Scratches can arise, but they are more likely to be deposits from the material that the case scratched against than a disappearance of the coating, so they can be buffed out at service, through sandblasting that will give a brand new finishing to the case. So the vickers hardness of this material is lower than ceramic but it does not shatter on impact. Lightness is a pretty obvious characteristic, but another one I learned about was related to shocks and scratches, clearly something you never look forward to but which inevitably happens. Previously we'd only seen this in the El Primero Range-Rover Limited Edition, but now its going main line.Īnd, because you know my curiosity, I grilled the product development team on the advantages and drawbacks of such a case. Basically you can understand it as a fine ceramic coating over an aluminum base. In 2019, Zenith produced the Chronomaster Revival Lupin The Third, inspired by with a black, grey and gilt model before following up the following year with the panda version. The steel versions on the calfskin strap cost 8,400. Thickness is a reasonable 12.6mm, lug width is faithful to the original at 19mm and lug. All the right dimensions are here and that means a 38mm stainless or rose gold case with 50 meters of water resistance and a domed, albeit sapphire, crystal. There is the signature tri-color dial configuration in a steel case a reverse-panda black dial with silver chronograph registers, also housed in steel and an 18-karat rose-gold version with the iconic tri-color dial. First glances at the Zenith Chronomaster Original translate to an exact copy of the original A386. Yet, the most modern feature is clearly the case material, a black ceramicised aluminum. Again, the Chronomaster Original comes in three versions. The two new Zenith El Primero 36,000 vph (36,000 vibrations per hour being the beat rate of the caliber), are both the middle 42mm size.
0 Comments
Leave a Reply. |